Question 10030 of 844 · Washington 01 Journey Level Electrician Exam
For conductive pool shells, perimeter surface bonding must attach to the structural reinforcing steel or copper grid at a minimum of how many points?
Exactly one answer is correct.
You got of questions right. Here on the question pages nobody remembers which ones you got wrong. The trainer saves your progress and asks the mistakes again until they stick.
Or free: the 10 questions most people get wrong
Show solution
Correct answer to question 10030
- C: 4 points uniformly spaced around the perimeter
Explanation
For conductive pool shells, perimeter bonding is attached to the reinforcing steel or copper grid at a minimum of four points uniformly spaced around the perimeter. For nonconductive shells the four point attachment is not required.
More questions: Special Equipment, Pools, PV and EV
- 10031Pool water must be bonded by a conductive surface in contact with the water of at least what area?
- 10032Metal parts such as fences or railings must be bonded when within what distance of the inside walls of a pool, unless separated by a permanent barrier?
- 10033A commercial spa requires an emergency shutoff for the recirculation and jet system. Where must it be installed?
- 10036How must a hydromassage bathtub be supplied?
- 10038For a fountain, which equipment requires GFCI protection unless it is listed for operation at low voltage?
- 10042A pool pump motor is connected to a single-phase, 240-volt, 20-ampere branch circuit. What protection is required for the outlet?