Question 7018 of 844 · Washington 01 Journey Level Electrician Exam
Three-way and four-way switches must be wired so that switching is done in which conductor?
Exactly one answer is correct.
You got of questions right. Here on the question pages nobody remembers which ones you got wrong. The trainer saves your progress and asks the mistakes again until they stick.
Or free: the 10 questions most people get wrong
Show solution
Correct answer to question 7018
- A: Only the ungrounded conductor
Explanation
Section 404.2(A) requires three-way and four-way switches to be wired so all switching is in the ungrounded circuit conductor. Where wiring is in metal raceways or enclosures, the circuit conductors must also be grouped together.
More questions: Equipment, Devices and Luminaires
- 7019How must snap switches, including dimmers, be grounded?
- 7021What is the maximum height of the center of a switch operating handle above the floor or working platform in its highest position?
- 7022An ac general-use snap switch controls a motor load. What is the maximum motor load relative to the switch rating?
- 7023Where are switches prohibited in a bathroom?
- 7024Snap switches in a single box have more than 300 volts between adjacent devices. What is required?
- 7027A hallway light must be controlled from three separate locations. Which combination of switches is used?