Question 1114 of 844 · Washington 01 Journey Level Electrician Exam
For equipment rated 1200 amperes or more and over 6 feet wide containing overcurrent devices or switching devices, 110.26(C)(2) generally requires:
Exactly one answer is correct.
You got of questions right. Here on the question pages nobody remembers which ones you got wrong. The trainer saves your progress and asks the mistakes again until they stick.
Or free: the 10 questions most people get wrong
Show solution
Correct answer to question 1114
- C: An entrance to and egress from the working space at each end
Explanation
110.26(C)(2) requires at least one entrance of sufficient area, at least 24 inches wide and 6.5 feet high, at each end of the working space for large equipment. Exceptions apply for unobstructed exits or doubled working space.
More questions: Definitions, Theory and Plans
- 1115NEC 110.12 requires electrical equipment to be installed:
- 1116Equipment intended to interrupt current at fault levels must have an interrupting rating that is:
- 1001If the resistance of a circuit stays the same and the applied voltage is increased, what happens to the current?
- 1002A heater operates on a fixed supply voltage. If its element resistance were doubled, the current would:
- 1003If the current through a fixed resistance is doubled, the power dissipated in that resistance becomes:
- 1004A resistive load draws 10 amperes from a 120-volt supply. How much power does it use?