Question 13123 of 844 · Washington 01 Journey Level Electrician Exam
What is the inverse time breaker maximum for a 3 hp, 230 volt, single-phase motor (table FLC 17 A), allowing the next higher standard size?
Exactly one answer is correct.
You got of questions right. Here on the question pages nobody remembers which ones you got wrong. The trainer saves your progress and asks the mistakes again until they stick.
Or free: the 10 questions most people get wrong
Show solution
Correct answer to question 13123
- C: 45 A
Explanation
250 % of 17 A is 42.5 A, which is not a standard size, so the next standard rating of 45 A is permitted. Rounding down to 40 A is allowed but is not the maximum.
More questions: Electrical Calculations
- 13001A resistive heating element has a resistance of 15 ohms and is connected to 120 volts. What current does it draw?
- 13002A 4,800 watt resistive water heater is connected to a 240 volt single-phase circuit. What is the current?
- 13003What is the resistance of a 1,500 watt, 120 volt space heater element at its rated operating point?
- 13004A heater rated 4,000 watts at 240 volts is connected to a 208 volt supply. Assuming constant resistance, about how much power will it produce?
- 13005A current of 10 amperes flows through a conductor path with a total resistance of 0.5 ohm. How much power is lost as heat in the conductors?
- 13006A balanced three-phase 480 volt resistive load is rated 50 kW. What is the line current?