Question 10022 of 844 · Washington 01 Journey Level Electrician Exam
For sinusoidal ac, the low-voltage contact limit used in Article 680 is how many volts RMS?
Exactly one answer is correct.
You got of questions right. Here on the question pages nobody remembers which ones you got wrong. The trainer saves your progress and asks the mistakes again until they stick.
Or free: the 10 questions most people get wrong
Show solution
Correct answer to question 10022
- D: 15 volts
Explanation
The low-voltage contact limit is 15 volts RMS for sinusoidal ac, 21.2 volts peak for nonsinusoidal ac, 30 volts for continuous dc, and 12.4 volts peak for dc interrupted at 10 to 200 Hz. Equipment operating at or below this limit poses a low shock risk in water.
More questions: Special Equipment, Pools, PV and EV
- 10025What is the minimum size of a solid copper equipotential bonding conductor for a permanently installed pool?
- 10027Perimeter surfaces around a pool must be bonded for what minimum horizontal distance beyond the inside walls?
- 10030For conductive pool shells, perimeter surface bonding must attach to the structural reinforcing steel or copper grid at a minimum of how many points?
- 10031Pool water must be bonded by a conductive surface in contact with the water of at least what area?
- 10032Metal parts such as fences or railings must be bonded when within what distance of the inside walls of a pool, unless separated by a permanent barrier?
- 10033A commercial spa requires an emergency shutoff for the recirculation and jet system. Where must it be installed?